*We recommend using a Flathead screwdriver to tighten all locking nuts 100%
inserting the nut to ensure it locks 100%
WARNING:
Any furniture that is not anchored to a
wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but
please note that different wall materials may require
different fixing devices from those supplied.
Jesse Bedside Table
1
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | po Box 6171,Maroochydore,QLD,4558
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
J
K
bracket
x4
bracket
screw x8
B
A
x20
C
D
E
F
G
x20
x8
x2
L + R
bolt
locking nut
dowel
H
I
35 mm
x8
small screw
x4
x4
screw
x4
Hardware Supplied
x2
L + R
cam nut
cam bolt
long
screw x4
x2
washer
Z
wall
screw
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
x1
Wall Strap
plastic
glide x4
L
