Blake Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
5
7
8
Attach door panels [7] and [8] as shown, starting with the back door
first and then the front door. Press the clip down on the back of the
door to assemble the door. Push the clip back up to lock into place.
Attach 4x wedges (I) into the corners of the back of the unit and secure
with 4x screws (J). Attach 1x safety strap (V) to the top of the back side
of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten
with a screwdriver.
1
back
OK
Note: If the door is not sliding smoothly or
sitting straight, there is a screw in the
middle of the wheel on the bottom of each
door that can be tightened/loosened until
the door is sitting properly.
7
8
I
J
I
J
1
6
V
Z
W
V
Z
W
