Be sure PC -IP102ID is added in the monitor se ngs well and is enabled there.
2.6 Group Call
If you want to call via one bu on door sta on more than one monitor at the same me,
you can use “group call” func on. For group call you can´t connect every monitor models. This
func on you can use only for combina on of
PM -Ip350 / PM -IP700TMD
OR
PM -IP701TMD / PM -IP701TMD
. There can be max.
6
monitors.
2.4.1. Settings for PM -Ip350/ PM -IP700TMD connection
The first (MASTER) monitor must be set to
101
adress and next monitors (SLAVES) must
be set to
199
/
198
/
197
/
196
/
195
adress. Eventually as on the table below:
2.4.2. Settings for PM -IP701TMD/ PM -IP702TMD connection
The first (MASTER) monitor must be set to
101
adress and next monitors (SLAVES) must
be set to Extension mode with
101-1
/
101-2
/
101-3
/
101-4
/
101-5
adress. Eventually as on the
table below:
