132
/140
D25M Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
3.7 Additional Notes
3.7.1 Weatherproof Qualities
The MOBOTIX D25M IT/Secure models have been certified weatherproof according to IP65
(absolutely dust-proof and resistant to water jets) and can also be wall-mounted outdoors.
The MOBOTIX D25M Basic has attained a protection class of IP54.
3.7.2 Password For The Administration Menu
Accessing the administration menu of the camera (Admin Menu button) is only possible
after entering a user name and password.
• Factory default user name is
admin
• Factory default password is
meinsm
The Quick Installation assistant automatically appears when the administration menu is
accessed for the first time. It provides an easy method to adjust the basic camera set-
tings to the current application scenario. For security reasons, it is highly recommended to
change the default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are
case-sensitive.
Caution
Make sure that you store information on user names and passwords in a secure
place. If you lose the administrator password and cannot access the Administration
menu, the password can only be reset at the factory. This service is subject to a
service charge!
3.7.3 Permanently Deactivating The Microphone
Deactivating a camera’s microphone may be necessary in order to protect the privacy of
persons at a workplace or for other reasons. You can permanently and irreversibly deac-
tivate the microphone in the
Admin Menu > Loudspeaker and Microphone
dialog box.
3.7.4 Starting The Camera With The Factory IP Address
If the camera’s IP address is not known, you can start the camera with its factory IP
address.
Section 3.2.5, «Starting The Camera With The Factory IP Address» describes this
procedure in more detail.
The microphone can be
irreversibly deactivated!
