55
/124
First Installation Steps
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
2.3.3 Connecting The Ethernet Cable With The MX-Patch-Box
The
MX-Patch-Box
enables you to connect a MOBOTIX camera
with a
patch cable
or with an
Ethernet installation cable
simply and watertightly for the following cases:
• Outdoor installation (preferably using the
Outdoor Wall
Mount
)
• Indoor installation with Ethernet installation cable
For more information on the MX-Patch-Box, please visit
www.mobotix.com
and go to the
Products > Accessories
> Interface Boxes
section.
2.3.4 Connecting The MiniUSB Cable
Existing additional modules like the MOBOTIX ExtIO (USB) can be connected via the MiniUSB
connector.
1.
Remove the outer shell
: Remove the outer shell using
the supplied custom tool. Insert the tip of the custom
tool into the three small holes of the shell, one by one.
Lift the outer shell to loosen it from the fixtures.
2.
Remove cable cover
: Remove the two M4x25 Allen
screws from the cable cover using the 3-mm Allen
wrench.
3.
Remove cable cover
: Remove the two M4x25 Allen
screws from the cable cover using the 3-mm Allen
wrench.
4.
Remove rubber plug
: Carefully bend the cable guide
upwards and remove the rubber plug. Keep the rubber
plug in a safe place (ideally in the camera’s original
packaging).
Use the supplied
custom tool