background image

 

BATTERY AND CHARGER 

 

Each MOBOT® 1 sec eBike electric bicycle is equipped with a special lithium polymer battery and 
special smart charger. These accessories that come with each scooter have a dedicated number, do 
not use the chargers from other brands. Damages caused by using inappropriate battery chargers is 
not under usual product warranty. 

 

Battery 

1)  When charging the battery, the LED turns red which means that charging is in progress. When 

it is in “green” it means battery is fully charged. 

2)  If the red light does not turn green after continuous charging, please visit our service center. 

3)  For the first 5 uses, please charge the battery for at least 10 hours before use. 

4)  Please do not charge the battery for more than 12 hours. 

5)  Charge the battery in area temperature of (0~45)°C, the ideal temperature for charging will be 

25°C. 

6)  Please charge the battery once every month, if not in use for a long period of time. 

7)  Do not operate motor while charging. 

(Important!) 

8)  Avoid direct contact of the battery from flames and direct sun exposure. 

9)  Avoid water or other liquid to be in contact with the battery. 

10) We recommend you to go for maintenance once every 3 months to check on the body and 

parts of the scooter. 

 

Charging Description 

1)  Open the charging hole under the rubber protective cover and plug in the charger connector. 

2)  Connect the charger plug into the power socket. 

3)  The charger light turns red when charging is in progress. Charger light turns green when 

battery is fully charged. 

4)  Please close the main power of the scooter, and charge the scooter around 48V. 

5)  Please always check whether there is still remaining power left in the battery the next trip. 

6)  The company provides dedicated charger which has a charging protection function, when the 

battery is 100% charged, the charger will automatically stop charging. Charging time is no 
more than 3 hours. 

7)  Water immersion, collisions, and other abnormal factors will lead to charger damage, which is 

not covered under warranty. 

13 

 

Summary of Contents for Mars & Venus

















Reviews: