Mobius MBX BUCKER User Manual Download Page 3

5

SAFETY

SAFETY INSTRUCTIONS

To ensure operator safety while in use, this device includes decaling, guarding, and other safety features. 

Operators are encouraged to use caution and best judgment when using equipment. Equipment 

should be serviced when required.

To avoid possible damage to the machine and risk of injury to the operator, consult with an ETEROS 

TECHNOLOGIES representative to answer any questions.

This document refers to the ETEROS TECHNOLOGIES product de-stemming machine as the MBX BUCKER. 

Since this machine has a rotary cutting unit, special safety precautions must be observed to reduce the 

risk of personal injury. Careless or improper use may cause serious or even fatal injury. Please read and 

understand these precautions thoroughly before using the machine.

All operators must read and understand this User Guide and be trained in safe operation and use of the 

MBX BUCKER. We recommend the owner of this equipment develop a standard operating procedure 

specific to each worksite to address any local hazards or other conditions not outlined in this User Guide. 

The MBX BUCKER must be inspected regularly for damage, component failure, and wear. Results of 

inspection activity should be documented. 

ETEROS TECHNOLOGIES makes every effort to ensure the MBX BUCKER is compliant with all current 

safety standards. It is the responsibility of the owner to ensure all municipal, provincial, state, county, 

territorial, and federal codes, regulations and standards have been met in each working location.

Do not lend or rent your machine without providing the User Guide. A first-time operator should receive 

practical instruction before using the machine. 

This machine is not to be used for any purpose other than those expressly stated in the User Guide, 

advertising literature, or other ETEROS TECHNOLOGIES written material pertaining to the MBX BUCKER.

Operators must be in good physical condition and mental health to operate this device. Under no 

circumstances  should  the  device  be  operated  by  anyone  under  the  influence  of  any  substance, 

including drugs or alcohol, which might impair vision, dexterity, or judgment. Do not operate the MBX 

BUCKER when fatigued. Be alert. If tired while operating the device, take a break. Fatigue may result in 

loss of control. Working with any equipment can be strenuous. If you have any condition that might be 

aggravated by strenuous work, check with your doctor before operating the device.

DISCLAIMER

ETEROS  TECHNOLOGIES  recognizes  that  the  MBX  BUCKER  is  a  purpose-built  machine  for  processing 

cannabis by licensed producers. Please check all municipal, provincial/state, and federal laws and 

regulations before using the MBX BUCKER. ETEROS TECHNOLOGIES does not promote or condone the 

use of processing equipment in any way that may be deemed illegal.

ETEROS TECHNOLOGIES recognizes that our equipment can be used for processing herbs, hops, flowers 

and many other products. It is not the responsibility of ETEROS TECHNOLOGIES to confirm alternative 

applications for our equipment.

© 2 0 2 0   E T E R O S   T E C H N O L O G I E S   I N C .     A L L   R I G H T S   R E S E R V E D .     |       M O B I U S T R I M M E R . C O M

|     C O N T E N T S     |

Summary of Contents for MBX BUCKER













Reviews: