８
3.2 Operation Specifications
3.2.1 Printer On
The printer is powered on by pressing the power button; the power
indicator is on with green color whenever the printer is on.
Notice: when the batter is almost exhausted, the power indicator blinks
with red color, in this case, you must charge the battery by using the
adaptor. The method of charging the battery, please refer to 3.2.5.
3.2.2 Printer Off
The printer is off after hold down the power button. All the indicators are
off whenever the printer is off.
3.2.3 Self-test
The self-test checks the printer’s current settings, status and whether the
printer has any problems. Turn on the power while holding down the
FEED button, the self-test begins.
The printer is ready to receive data as soon as it completes the self-test.
3.2.4 Paper Feeding
When the printer works normally, hold down
【
FEED
】
button, the paper
feeding begins, and stops when hold down
【
FEED
】
button again. When the
printer works in black mark mode, hold down
【
FEED
】
button, the printer
begins to feed paper and stops at the position of black mark. If the paper is
not black mark paper, the printer stops automatically after feeds paper for
30cm.
3.2.5 Battery Charging
The power indicator becomes red when the power of the battery is run out,
so charging the battery is required in this situation.
The charging method is as following: turn off the printer, connect the
adapter to the power socket with 220V, 50HZ, then plug the power
charging cable to the power socket of the printer, so the power charging
begins, during the course of power charging, the
【
FEED
】
indicator goes
green, and becomes dark when the charging is over.
Notice: it would better not turn on the printer during the course of charging
power, lest the charging time goes longer, moreover, be sure not to use the
printer to print when the battery is charging.
when the battery is low, the power indicator blinks with red color and the
buzzer rings 3 times; if the printer is in sleeping mode, the printer will cut
