MobilMAX MX-LOCare BR1, Safety And Regulatory Manual

Page: 5 / 7

highest SAR value for this device when tested was 3.075W/Kg@10g .
SAR is measured utilizing the device’s highest transmitting power, the actual SAR of
this device while operating normally is typically below the indicated values above.
This is mainly due to the automatic changes to the power level of the device to
ensure it only uses the minimum power required to communicate with the cellular
network.
* NOTE : The MX-LOCare GPS Locator has been shown to be compliant for localized
specific absorption rate (SAR) for uncontrolled environment/general exposure
limits specified in ANSl/lEE Std. C951- 1992 and had been tested in accordance
with the measurement procedures specified in IEEE152B- 2003, and OET Bulletin
65 Supp. C.
Interference with medical equipment functions
This product may cause medical equipment malfunction. The use of this device is
forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the device manufacturer to
determine if they are adequately shielded from external radio frequency (RF) energy.
Your physician may be able to assist you in obtaining this information.
Power off the device when in health care facilities when any regulations posted
instruct you to turn off your cellular phones. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy. To power off the
device, please reference the user manual.
Exposure to water
This product was designed to be waterproof to a depth of 1m (3 feet) or 0.1 ATM
above standard atmospheric pressure measured at sea level, it may be worn for
bathing, showing and swimming continuously up to one hour. Exceeding the depth or
continuous exposure may result in water infiltration and damage to your product.
WARNING ; if water or any other fluid enters the Locator, stop using it
immediately to avoid the possibility of fire or burns.
Regulatory agency identifications