It is necessary to make sure full extent of each level of ladder.
Check the push button is at correct position, always check if the
outer edge of push button is overlapping).
5.0
Weight Capacity
Caution
Make sure the weight of the load is less than 30 kg
Never overload the Hoist as it will damage the motor and make
it unsafe to operate
Identify real weight of loading object and height to lift before use
the Hoist
6.0
Power Connections
1. Please uncoil all the strap so that it will not pose any danger
when operating Hoist
2. Connect the male XLR Cannon plug in to the bulkhead socket
on control box of the Hoist
3. Connect the other end of the cable with the male XLR Cannon
plug in to the bulkhead socket on Joystick controller on the
Mobility TEK
4. Power connection is complete when both plugs are fully
engaged in to their respective receptacles
