7
8
STEP FOUR: Pair the wireless PTT to the dongle.
The Dual Dongle is sold with one of several different, wireless Push-to-Talk buttons. These buttons
allow you to wirelessly activate PTT for your two-way radio.
Before the wireless PTT button will function with a Dual Dongle, the two devices must be paired with
one another. Once they have been paired, the two devices will remember each other and should not
need to be re-paired again. To pair the Dual Dongle and a compatible wireless PTT do the following:
•
Turn off the radio that the DUAL Dongle is connected to. Wait at least three seconds.
•
Make sure that a compatible accessory is plugged into the Dual Dongle
’s headset connector.
•
Turn the radio on while holding down the Multifunction/PTT button on the DUAL Dongle.
Continue to hold the button down.
•
While continuing to hold down the Multifunction Button on the Dual Dongle, press and then
release the Push-to-Talk button on the finger PTT. Press and release this button approximately once
per second for 3-5 seconds.
NOTE:
If you receive an "invalid accessory error, please tune the radio to a digital channel rather than
an analog one and repeat the previous step.
•
Release the Multifunction button on the Dual dongle. Continue to press and then release the
Push-to-Talk button on the wireless finger PTT once a second for another 3-5 seconds.
•
Pressing the Push-to-Talk button on the wireless finger PTT should now cause the two-way radio to
transmit. If it does not, try repeating the pairing process.
The following MobilitySound wireless PTT buttons are compatible with the MobilitySound Dual
Dongle:
PTT-U2
5
STEP FIVE: Use the Dual Dongle
Once the Dual Dongle has been set up, you can use it the following ways:
• Received two-way radio calls will be heard through the earphone(s) of the connected audio
accessory. The volume is controlled by the volume knob on the two-way radio.
• Smart phone audio, including phone audio, media audio, and PTT over Cellular calls will be heard
through the earphone(s) of the connected audio accessory. The volume is controlled by the volume
buttons and sliders on the smart device.
• You can make two-radio calls by pressing and holding the PTT/Multifunction button on the Dual
Dongle. Transmit audio will be taken from the microphone of the connected audio accessory. Note
that if you have an (optional) compatible wireless Bluetooth PTT paired to the Dual Dongle, you
can also initiate radio calls by pressing and holding this button instead. Pressing either of these
PTT buttons will not have any effect on smartphone operation and will NOT initiate a PoC call.
• Phone microphone audio will also be taken from the microphone of the connected audio accessory.
This includes for phone calls, voice commands, sending PoC calls, etc.
• If the connected audio accessory has phone control buttons (such as a Hook button for answering or
hanging up phone calls, or Volume Control buttons) those buttons will be used to control the
phone. Pressing these buttons will not have any effect on the operation of the two-way radio.
• If the connected audio accessory has a PTT button that is compatible with your PoC app, this button
can be used to initiate calls using the PoC app installed on your smartphone. This button will not
have any effect on the operation of the two-way radio.
6
MobilitySound iSPM100
Optional audio accessory for use with the MobilitySound Dual Dongle
MobilitySound
’s innovative iSPM100 surveillance kit (sold separately) is the perfect companion product for
the Dual Dongle. The iSPM100 has both a phone hook button for answering and hanging up phone
calls, as well as a PTT button that is compatible with most Push-to-Talk over Cellular (PoC) apps
including Zello, Wave Communicator, ES Chat, and Kodiak compatible apps such as Verizon PTT Plus
and AT&T Enhanced Push-to-Talk. It features:
•
Custom made Braided Fiber cable is soft, comfortable and resists tangling
•
2-pin SNAP connector lets you change earpieces easily yet is extremely secure and rugged
•
This is an extremely rugged single-wire cable for lapel and Surveillance use.
•
Newly-designed mic housing contains custom microprocessor, power switch, PTT button and
phone hook button.
•
Thick, Braided Fiber radio cable with metal clamp retention eliminates strain on the wires inside the cable
•
360 degree rotating clip on PTT/mic housing attaches to lapel, coat, uniform, as required by user
The iSPM100 is available with different earpieces depending on your preference:
SUPPORT AND WARRANTY
Radio Products warrants this product against defects in materials or workmanship for a period of one
year from the date of retail purchase. PRYME will repair or replace a defective unit, at our option,
without charge for parts or labor. The limited warranty is extended only to the original purchaser
and is valid only to consumers in the United States and Canada. It does not cover damage or failure
caused by or attributable to Acts of God, abuse, misuse, improper or abnormal usage, faulty
installation, improper maintenance, lightning, or other incidences of excessive voltage, or any
tampering or repairs by other than a PRYME authorized repair facility. It does not cover replacement
of consumable parts, transportation costs, or damage in transit.
Repair or replacement under the terms of this warranty does not extend the terms of this warranty.
This warranty can only be modified by an officer of PRYME Radio Products, and then only in writing.
Should this product prove defective in workmanship or material, the
consumer’s sole remedies shall
be such repair or replacement as provided by the terms of this warranty. Under no circumstances shall
PRYME Radio Products be liable for any loss or damage, direct, consequential, or incidental, arising out
of the use of or inability to use this product. Some states do not allow limitations on how long an
implied warranty lasts or the exclusions or limitations of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You
may also have other rights, which may vary, from state to state.
For support or warranty service on your PRYME product, contact us at 1-800-666-2654 or visit us on
the web at www.PRYME.com.
COPYRIGHT AND TRADEMARK INFO
© 2018 PRYME Radio Products, Brea, CA. All Rights Reserved.
PRYME® ,
PRYMEBLU™ and PRYME WTX™ are trademarks owned by PRYME Radio Products.
Android is a trademark of Google Inc.
Apple is a trademark of Apple Inc.
AT&T is a trademark of AT&T Intellectual Property and/or AT&T affiliated companies.
ESChat is a registered trademark of San Luis Aviation, Inc.
iOS is a trademark of Cisco Systems and is used by Apple Inc. under license.
Kodiak Networks is a trademark of Kodiak Networks Inc., a wholly owned subsidiary of Motorola
Solutions, Inc.
Verizon Wireless is a trademark of Verizon Trademark Services, LLC.
SNP-EP31
Acoustic Tube Earphone
SNP-EP67
C-Ring Earphone
SNP-EP51
Soft Earhook Earphone
SNP-EP65
D-Ring Earphone
SNP-EP67
G-Hook Earphone
WAVE and WAVE COMMUNICATOR are trademarks of Twisted Pair Solutions, a wholly owned
subsidiary of Motorola Solutions, Inc.
ZELLO is a trademark of Zello, Inc..
All other product or service names are the property of their respective owners.All other product or
service names are the property of their respective owners.
DISCLAIMER:
The Bluetooth wireless link used by this product is an open standard, unsecured
technology. As such, it is not recommended for first-responder or other mission critical users.
