background image

 

                               

 

Federal Communication Commission Interference Statement 

 
This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation.   
This equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is 
no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one of the following measures:   
-Reorient or relocate the receiving antenna.   
-Increase the separation between the equipment and 
receiver.   
-Connect the equipment into an outlet on a circuit di-
fferent from that to which the receiver is connected.   
-Consult the dealer or an experienced radio/TV technician 
for help.   
FCC Caution: Any changes or modifications not expressly 
approved by the party responsible for compliance could 
void the user's authority to operate this equipment.   
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:   
(1) This device may not cause harmful interference, and   
(2)this device must accept any interference received, 
including interference that may cause undesired 
operation. 
This equipment complies with FCC RF radiation exposure 
limits set forth for an uncontrolled environment. To 
maintain compliance with FCC RF exposure compliance   
requirements, please avoid direct contact to the 
transmitting antenna during transmitting.     

 

RF Exposure Warning!   

 

This device contains transmitters and receivers which 
emit Radio Frequency (RF) energy.    The device is 
designed to comply with the limits for exposure to RF 
energy set by the Federal Communications Commission 
(FCC) of the United States, Industry Canada (IC) of Canada, 
and the regulating entities of other countries. 
If you are still concerned about exposure to RF energy,   
you can further limit your exposure by limiting the   
amount of time you use the equipment or by placing   

more distance between your body and the device,   
since exposure level drops o dramatically with distance.   
 

Mobility Sound PTT-600-VZ 

Wireless Speaker Microphone   

----------------------------------------------- 
 
 
For Use with Zello on Android 
Smart phone 

 
 
 
Model No.: PTT-600-VZ 
Made in Taiwan 

 
Mobility Sound is trademark owned by Mobility Sound   
Products, Taiwan. All other product or service names are 
the property of their respective owners.   
© 2015 Mobility Sound Products, Taiwan. All Rights 
Reserved   

Summary of Contents for PTT-600-VZ









Reviews: