4
BT Dongle User Manual
<Procedure for Pairing Bluetooth headset device to dongle>
(Note: The Bluetooth-PTT needs to switch off before performing the following steps if it
has been connected to the dongle)
1. Switch the power on while pressing and holding the PTT button at the same
time for about 3 seconds. It will enter the pairing mode for the Bluetooth headset.
The blue LED will flash twice per second.
2. Power on the Bluetooth headset and enter the pairing mode.
(Please check the user manual of the Bluetooth headset)
Then the Bluetooth headset will be paired and connected with the dongle
automatically. And the blue LED on the dongle will flash once every 4 seconds.
<Procedure for Pairing Bluetooth-PTT device to dongle>
(Note: The Bluetooth headset needs to off before performing the following steps if it has
been connected to the dongle)
1. Switch the power on while pressing and holding the PTT button at the same
time for about 3 seconds. It will enter the pairing mode.
The blue LED will flash twice per second.
2. Then short press the PTT button to enter the BLE pairing mode for the
Bluetooth-PTT.
The blue LED will flash 3 times per second.
(Note: Switch off the original Bluetooth-PTT if you are pairing with a new one.)
3. Power on the Bluetooth-PTT, and it will be paired and connected with the dongle
automatically.
The blue LED on the dongle will flash once every 4 seconds.
Note: When you press the PTT button. If the LED of dongle is not flash 3 times
per second, but 2 times per second, you may need to check the power of your
original Bluetooth-PTT and make sure it is off.
After Bluetooth headset paired and Bluetooth PTT button paired, plug dongle to go.
PS: Only BLE-PTT linked it will not work until BT headset linked.
0
