Mobility Holdings BioLogic ReeCharge, Owner'S Manual

Page: 13 / 20

13
2. Twist the dynamo wires together with the dynamo
kit wires, then insert through the dynamo connector
and bend over before reaffixing the outer casing.
WARNING: Ensure that the two groups of wires do
not contact each other. If the wires touch, it will form a
short-circuit which may damage connected devices.
3. Plug the dynamo connector into the dynamo plug.
4. Fasten the power regulator (1) with zip ties (2)
ensuring no wiring interferes with brakes, cables or
spokes. Then insert the DC-plug into the DC-jack of
the ReeCharge bracket.