Assembly and Instruction
1. Place the Mobilita back rest onto the bed squarely
with the blue fabric covered support section facing
upwards and the small padded head rest at the top of
the bed.
2. Raise the blue fabric covered support section of the
back rest to the required height.
3. Insert the hinged holding bar on the back of the
support section into one of the sets of plastic hook stays
on the base of the product.
4. Ensure that the bar is seated fully on both of the
hook stays before use.
Carefully remove packaging. Avoid using knives or other
sharp instruments as this may damage the surface of
the product.
HEIGHT ADJUSTMENT
: The Mobilita Adjustable Back
Rest is designed to give you many years of service,
however please note important information below to
ensure your product remains in good working order:
Do not exceed the weight limit of 113kg as this will
compromise the safety of the user
Usage and Maintenance
Instructions
Do not share the backrest with anyone; it is designed
for one person only.
Do not place obstacles or limbs between the opening
section of the back rest at any time.
Check that the back rest is properly locked in the
plastic hook stays when in use.
Keep naked flames, cigars and cigarettes well away
from the back rest.
CLEANING
: It is important that you only clean the
product using a non-abrasive cleaner or mild detergent
with a soft cloth. Abrasive cleaners. Abrasive cleaning
pads will seriously damage the product beyond repair.
Always ensure that you wipe dry the equipment after
cleaning.
Check the product for any visible damage If you see any
damage or suspect a fault, do not use your product, but
contact your supplier for support.
Please Note :
Part of the product packaging is plastic,
please take care when handling and keep the packaging
well away from children and babies to avoid the danger
of suffocation.
Please dispose of all packaging carefully.
02