Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Rollators are supplied in cartons, detached in to few elements for easier transportation:
The contents are:
1 Main Frame with wheels, shopping basket and seat
2 Detachable Push Handles with Brake Handles attached
1 Detachable backrest bar
1 User's manual
Assembly description
●
Check with the list from above if nothing is missing. If you’d discover at that stage that some
part is missing or damaged, do not continue assembly process. Contact your supplier of the
product right away.
●
Put the main frame with wheels on the flat surface. All wheels should touch the floor.
●
Press the frame reinforcement rod downwards until the frame is fully opened. Push the seat
pad down, so it is in horizontal position
●
Always ensure the frame is stable and fixed when the rollator is opened.
●
Insert the lower ends of push handles in to holes at the top of handle tubes as it is shown on
picture above.
●
Adjust both push handles to the same height. Ensure that the fixing holes in the push handle
and in the handle tube are parallel.
●
Put the bolt the fixing bolt through the parallel holes. Do it from the inside of the frame so the
fixing knob should be located on the outside. Tie the fixing knobs on the handle tubes as
shown on the picture above.
●
Make sure that the fixing knobs (2 pieces) are securely locked so that the rollator is stable and
parts can not move when forced.
●
Attach the backrest. Insert the backrest tube ends in to backrest attachments located on main
frame as shown on the picture. You should hear the ”click”sound to ensure that the back is
safely locked.
●
Always test to see that the rollator and attachments are properly and safely locked in place
BEFORE using.
●
Failure to follow these warnings can result in personal injury.
●
To fold the rollator lift the seat pad first. Then pull the frame reinforcement rod upwards. The
frame should fold.
Function description
●
Adjust the height of the push handles so that when the user’s arm is down along the body,
the handles are at wrist height. Adjust the height by releasing the fixing knob located on
handle tube and pulling the bolt out of it's place. Then adjust supports to your desired height,
Rev. 06/17
Page 3 of 5
UM-312060-62-GB
Detachable Backrest
Push Handle
Brake Handle
Elevable Seat Pad
Rear Wheel
with Brake
Frame Reinforcment
Rod
Handle Tube
Front, Rotating
Wheels
Handle fixing
knob
Shopping Bag
Backrest attchment
with push button
lock
