Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
1. General information
Dear customer,
This user manual contains a description of the medical device and important guidances to ensure a
correct and safe usage of the product. It is important prior to use to read this manual carefully. It is
especially important to read the safety requirements and follow these.
We continuously develop our products and we reserve the right without further notice to change the
specifcations and functions of products.
Intended use of the device
Mobilex Shower Chair is medical device intended only to be used by patients that because of
invalidity need support during during washing under the shower. Physically handicapped persons can
use it as stable support and to get easy access to all human body parts during washing .The device
should be used inside bathrooms only. Bathseat can be maximally loaded with 100 kg. Any other use
then intended is strictly prohibited. By questions please take contact to your dealer or directly to
Mobilex A/S.
Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
Denmark
Phone:
+45 87 93 22 20
Telefax:
+45 87 93 17 77
E-Mail:
2. Safety requirements
●
Only use the wall mounted shower seat in good technical condition.
●
If you detect any crack or damages, please contact your dealer immediately.
●
Observe the information on the label. Don’t overload the wall mounted shower seat.
●
Only use the wall mounted shower seat for the purpose it is intended for.
●
Don’t climb on to the wall mounted shower seat.
●
The wall mounted shower seat must only mounted on sturdy walls.
●
Adjust both feet to the same length so they stand stably on the floor surface when chair is
opened. The seat surface must be flat then .
●
When unfolding the wall mounted shower seat the user must take care not to squeeze the
fingers or other body parts between device's elements.
3. Description
Product description
Mobilex shower chair is made from powder coated steel tube with a base plate to secure it to the
wall, they are warm to the touch and corrosion resistant. The wall mounted shower seat has the seat
support rails hinged at the plate allowing it to folded away and locked an upright position. Folds fat
against the wall when not in use therefore save space
Assembly description
Shower Chair should be ftted by competent person and secured to a wall capable of supporting the
vertical load and leverage afected upon it by the user.
Determine the seat height
The seat height of the wall mounted shower seat should be adjusted to suit the user.
As a rule, the seat height is correctly adjusted when the user is sitting on the chair and bout
feet touch the ground
Choose a normal chair on which the user can sit comfortable and measure the distant
between seat and foor.
According to it, adjust the legs to desire height.
Adjusting the legs to desire height
Grasp the horseshoe clip between forefnger and thumb and pull it out.
Slide the leg to the required position.
Push the clip frmly back into the hole.
Set the other legs to same height as described.
Rev. 12/17
Page 2 of 4
UM-302040-GB
