Note
：
Position Worm Gear Clamp opposite to Transmitter for
better tire rebalancing
。
4th.
Cut excess Clamping Strap off to approximately one
inch (25mm) from Worm Gear Clamp with a Cutter
；
remove burrs from Clamping Strap end
。
1. Assemble Tire
2. Assemble Tire
1st.
Place tire under Transmitter as shown below
。
2nd.
Use auto-install machine to install the lower-side of tire
onto rim
。
Position Worm Gear
Clamp Opposite to
Transmitter
Valve
Valve
Place Tire
Changing
Machine
’s Lever to
the Opposite Side
of Valve
Turn in This
Direction Slowly
Valve
