manualshive.com logo in svg

MobileHelp CBS4-01, User Manual

Share
Download
MobileHelp CBS4-01 User Manual Download Page 18

MobileHelp Customer Support 1-877-827-6207

18

Cellular Base Station Voice Guidance

   

If your system includes the Cellular Base Station, your Base Station will have voice 

announcements. Select announcements are listed below:

Event

Voice Prompt

Notes

The Cellular Base 

Station is powered on

System Ready

Base Station on/off switch has been turned on, be sure to 

connect to electric outlet or it will run on battery backup.

Both red Emergency 

and Blue Reset buttons 

are flashing

Power not detected or 

Power restored 

(when electricity is 

reconnected)

Check that the Base Station is correctly plugged  

into an electrical outlet.

The battery needs 

charging

Low Battery

Check that the Base Station is correctly plugged into an 

electrical outlet or it will run on battery backup.

The emergency call is 

initiated

Call in progress

Alarm is being sent to the Emergency Response Center.

Call connected

Please stand by for 

operator

Respond to the emergency operator’s call over  

the device speaker.

Cellular Base Station 

receives a fall signal

Fall Detected - Press and 

hold Button to Cancel

This will occur for about 20 seconds and will allow you time 

to cancel the alarm. During this time, you may press and hold 

thebutton on the Fall Button for 5 seconds to cancel the signal.

Fall alarm is canceled

Alarm Canceled

Alarm has been canceled.

Summary of Contents for CBS4-01





































Reviews:

No comments

Brands by name

Popular brands

Load more brands