MobileDemand xTablet T7200, User Manual

Page: 26 / 41

Hardware and Software
Stylus
You can use the stylus (touch pen) like a mouse, a pen, or your finger on the xTablet T7200 display to
perform regular left-click and right-click functions and to write in applications where applicable. W hen
you are not using the stylus, you should store the stylus in the stylus holder that is on the right side of
the
xTablet T7200 .
To perform a right-click function
Point and hold the stylus steadily on the display for about 3 to 5 seconds, wait for the cursor to
change (about 3 to 5 seconds), then lift the stylus away from the display and the appropriate right
click menu will show up.
Note that you can also perform this function using your finger.
Stylus pen with cord wrapped around upper end.
Hardware and Software
Global Positioning System (Optional)
The GPS Software Setup application is installed on the xTablet T7200 desktop as a shortcut for you
and will activate the 50-channel u-Blox 6 engine that is built into the xTablet T7200 .
To activate the u-center
1. Double-tap the GPS Software Setup shortcut icon on the xTablet T7200 desktop.
2.
Select a language from the Installer Language drop-down list, then tap OK (default is English).
3. Follow the instructions in the wizard to install the device driver, tap
Finish , then tap Finish to activate
the u-center .
Use the u-center User's Guide for information on how to operate the GPS. You will need Adobe Reader
to view this guide.
To access the u-center User's Guide
Select Start > All Programs > u-blox > u-center > Documentation , then double-tap User's
Guides , then double-tap the u-center User's Guide.pdf file to open.
22