xTablet T1180
13
Getting Started
Power Supply
This section provides basic safety precautions when using an AC/DC adapter and battery.
AC/DC Adapter
Ensure the xTablet T1180 is connected to an AC power source via the AC adapter before turning it on for
the first time. If the xTablet automatically shuts down due to low battery power, it is likely to cause system
failure. Below are some Dos and Don’ts for an AC/DC adapter.
► Dos
•
Use the adapter that shipped with xTablet T1180 only.
•
Always be aware of heat coming from the AC/DC adapter while in use.
•
Unplug the AC power cord before disassembly the notebook.
► Don’ts
•
Never cover an adapter that is in use as it can generate heat.
•
Never leave the power cord plugged in after powering off the system.
1.
Take up the interchangeable plug and look for the groove on the interchangeable plug which can be used for locking
on the AC/DC adapter. Then align the groove of the interchangeable plug on the tenon of the AC/DC adapter with
correct orientation. Next, rotate the interchangeable plug 90 degrees clockwise until it is fixed on the AC/DC adapter.
2.
Plug the DC end of the AC/DC adapter into the DC-in jack of the Tablet PC.
3.
Then plug the AC/DC adapter into the power outlet.
4.
When remove, please follow the steps 3 2 1.
(NOTE:The interchangeable plug may vary depending on countries or regions.)
