WWW.MOBILEWARMING.COM
Battery Installation
3.7volt Standard Sock Heat Ratings
Use only
MW-370
Battery
4
5
Quick Start Guide
Fully Charge batteries to 100%.
Place socks on your feet.
Press and hold the power button on the batteries for a few seconds. Once
it’s powered on LED will be Red/100% heat. Repeat for each battery.
Locate wire harness in battery stash pocket on inside of sock cuff (see
drawing).
Connect wire harness to battery and slide battery(s) in pocket. (See
drawing)
Now that the batteries are connected to the socks and powered on;
use the wireless controller to reach your desired heat settings.
To power off Socks, press and hold the power button on each battery until
light turns off. If you plan to not use socks for more than a few days, unplug
both batteries from the socks.
1-
2-
3-
4-
5-
6-
7-
Do not use battery if you notice a
change of shape (lumps),
over-heating when charging or if
rust or corrosion on the battery
connectors is found.
Power Ratings Based on Fully Charged Battery and Ambient Temperature of 72
°
136°F
(57.2°C)
4Hrs.
100%
116°F
(46.6°C)
6Hrs.
65%
90°F
(36.6°C)
11Hrs.
25%