Mobile One HSP-1 Series, Instructions And User Manual

Page: 4 / 12

NB: The Headset Ear Cups must be fitted over your ears
covering and enclosing them completely
The Headset should be fitted so that the horizontal axis of the Ear Cup bisects the
approximate tip of the nose of the wearer. This usually means the Headband of the
headset will be located directly above the ears, however the headband may be
adjusted slightly forward or rearwards for maximum comfort. See figure D below.
4
Note:
1. The horizontal axis at the nose
shown as the solid black line
2. The vertical position of the
Headband on the top of the head
as compared the vertical white
dotted line
Figure D
STEP BY STEP USER GUIDE
NOTE: The Headset is intended to be worn with the microphone
and cable on the left side of the head.
STEP 1
Fitting the Microphone Boom
Fit th d on
the
Ro
Ea
P
Figure 1.0
e Microphone Boom assembly to the mounting socket locate
Left Side Ear Cup (cable side).
tate the collar clockwise whilst screwing onto the socket on the
r Cup. Firmly
finger-tighten only.
artly bend the boom to where you estimate your mouth will be,
ensuring the Yellow Dot is facing towards the mouth .