2.1. Charging the Battery
Before using the headset, charge the battery for at least 2 hours
.
Charge with either the AC Charger or connect the USB Adapter to your computer.
While charging, headset LED will turn red. When fully charged, LED will turn blue.
2.2. Switching the Bluetooth Headset ON/OFF
To power the headset on, click and hold MFB until Headset LED lights up blue and then periodically
blinks blue.
To switch power off, click and hold MFB until Headset LED lights up red and shuts down.
2.3. Handsfree Operations
Function
Action / Tone Indicator
Pairing Mode
Powered OFF, click and hold MFB continuously for about 8 seconds until LED is
continuously displayed. From a Bluetooth phone, search for device and establish the
connection. If prompted for pin key, enter ‘0000.’ The LED will flash 10 times once
connected.
Answer Call
Answer call by folding headset. If headset is already folded, press the MFB on your
headset to answer call.
Make Call
Most phones automatically connect to headset once phone number is dialed. If your
phone does not support this function, press the MFB for one second to transfer the
call.
Redial
Press the MFB for one second.
Note: When MFB is pressed, some phones display the last number dialed or received.
Press MFB again to redial. Most phones allow direct redialing by clicking MFB just
once.
Voice Dial
Make sure your phone supports voice dialing and that it is activated. Ensure voice tags
have been recorded. To voice dial, press MFB in idle Handsfree mode. Follow the
instructions message from your phone to complete voice dialing.
Volume Control
Click (+) or (-) to adjust volume during Handsfree mode. The tone will increase or
decrease sound while being adjusted.
End Call
Press MFB. If the other party ends the call first, the headset automatically returns to
Handsfree standby mode.
Reject Call
Press and hold MFB until mobile phone stops ringing.
Ultra Power Save Mode Setting: Press and hold the MFB and volume (-) button simultaneously until the LED
light blinks.
Releasing: Press and hold the MFB and volume (+) button simultaneously until the
LED light blinks.
Mute
While talking, press the volume (+ or -) button for one second. To reengage or un-
mute, press the volume (+ or -) button for one second.
Call Waiting/On Hold
To place a call on hold and answer another call, press the MFB for one second and
answer the second call. Press the MFB for one second to switch back and forth
between calls. Press the MFB for less than a second to end a call.
