- 17 -
Making a call (outgoing)
A call can be made in the call mode selected on the screen.
For how to switch call modes, refer to “Switching call modes” on page 21.
1
: Check if the call mode and counterpart radio that you want to make a call to are correct and then press the
PTT button or the .
2
: After the “beep, beep, …” dialing tone, a blip sound is produced when the connection is completed.
3
: Speak into the microphone sound collecting port while pressing the PTT button.
Selected Radio ID screen
Call mode
Counterpart radio
• RSSI is just a rough indication and does not assure the call quality.
The flow of conversing voices may be interrupted during a call even when the radio
wave signal is strong.
RSSI
No service
Weak radio wave signal
Stronger radio wave signal
(Before connection)
PTT Button
Top
microphone
sound
collecting port
OK button
Screen displayed during a call
Making/Receiving
a Call
