Bluetooth Barcode Scanner BS03-B
User’s Manual
7
/
9
9) Open a text processor (eg. Notepad, WordPad, word) on the terminal device and start reading
barcode with the Bluetooth scanner. Data scanned is shown in a simulated keyboard input mode.
Note: if SPP protocol is specified, a software other than the common text processor (eg. Notepad,
WordPad, word) is asked to acquire data through the serial port. Please consult your software
vendor, computer technician or the device manufacturer for such configuration.
2.2 Bootup
Short press the trigger, the scanner boots up and starts self test for 1 second. When a beep tone
sounds, the scanner is ready to work and the LED lamp turns red.
2.3 Scanning Operation
1) One press on the trigger emits one laser beam. Direct the beam on the barcode to get a decode
as the figure shown bellow:
2.4 Shut-down
1) Hold the trigger for 5 seconds and release when a beep tone sounds.
2) Put aside the scanner for 20 minutes, it may enter standby mode and shut-down automatically.
2.5 Charging
The LED lamp lights green when charging or connecting to an external power supply.
