1
2
2
ATTACH POD ONTO STAND TOP
1
SCREW TUBE INTO STAND BASE
3
POWER ON:
PRESS AND HOLD POWER BUTTON (3 SEC) TO START.
LIGHT RING WILL ILLUMINATE.
POWER OFF:
PRESS AND HOLD POWER BUTTON FOR
10 BEEPS FOLLOWED BY 1 LONG BEEP, THEN RELEASE POWER BUTTON.
IF BUTTON RELEASED BEFORE SHUTDOWN, POD WILL REMAIN ON.
3
EQUIPMENT
ASSEMBLING THE TIMING SYSTEM
PAGE 2
SETUP ON THE FINISH LINE
Once you have assembled the timing system, position this on the side of the finish line, slightly facing
the oncoming runners, so that it is easier for the runner to bring their timing band into contact with the
timing pod.
When the runners complete the race, they will scan their timing bands against the timing pod.
As the timing band is scanned, the timing pod will beep and the light ring will illuminate green as
confirmation of the result having been captured.
The timing pod will automatically submit the result to the myrun server and the runners time will be
displayed on the website within a few seconds.
To watch example videos of setup and use of the timing system, please visit
mobii.com/myrun
ASSEMBLY