• Bluetooth specification : Version.2.1+EDR (refer to Glossary, P12 )
4. Getting started with your MobiFren
MobiFren GBH-M300 is very easy to use.
- Charging your MobiFren :
Make sure that your MobiFren GBH-M300 is fully charged before you use it.
Charge with Mini-USB charger, supplied together with GBH-M300 or, AC/DC adapter.
* The LED shows ‘RED’ during charging and will turn ‘BLUE’ when fully charged.
While using USB hub, charging may not be good due to low current.
- Pairing your MobiFren with mobile phone :
Before you use your MobiFren GBH-M300, you need to pair it with
your mobile phone.
1. Set pairing mode in GBH-M300
<Pairing on first purchasing>
① Move MFB button to “Unlock” position. (Power on)
② On first purchasing, if you turn on the power, the headset is ready
to be “Pairing mode” automatically. The LED is continuously on.
* If you do not pair to mobile phone within 3 minutes, the headset
will be out of pairing mode.
<Pairing to other device & pair again>
① Press and hold MFB button for about 4 seconds, after changing
from “Lock” to “Unlock” position at power-on.
② When the LED is continuously on after glittering for a short while,
the headset is ready to be “ Pairing mode”.
* If you do not pair to mobile phone within 3 minutes, the headset
will be out of pairing mode.
--------------------------------------------------------------------------------------------------------------
