Mobicom Telematics
–
G102 User Guide
9 / 18
Copyright ©
2018 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
Operation Steps:
⚫
Open the Case by tweezers, Pull out the mainboard from the case.
⚫
Open the SIM card slot
⚫
Insert the
Mini(Standard) SIM card
into the card slot with its gold-plated contacts facing towards the
Printed Circuit Board (PCB)
⚫
Slide the SIM card holder to the right to lock it in place
⚫
Do not forget to turn on the battery switch before putting the mainboard back in its metal casing.
➢
Ensure that SIM card
’
s SMS/GPRS Network service are available .
➢
Ensure that the phone card PIN lock has been closed properly.
➢
The backup battery can be charged when connected External Power supply.
7.2 Power on the device
Connect the Power cable(
red
) and ground wire(black) to the positive and negative electrodes of the
vehicle battery respectively.
➢
Detailed wire harness definition .Refer to
➢
If you tested G102 device at office, It
’
s better use the AC to DC Power supply as
below picture:
