16
ES
7. MAINTENANCE
STORAGE:
Keep your equipment in a closed space, away from dust and
humidity.
POWER CORD:
Ensure the cable and the plug are in good condition.
SCREWS AND CABLES:
Check and tighten the screws often, as due to
the vibration screws and nuts tend to loosen. Check regularly that the
cables are in good condition.
LUBRICATION:
It is very important to properly lubricate the running belt
with silicone or teflon oil.
This lubrication must be applied regularly,
even before the first use. There is an orifice to add the oil in the engine
cover. It is recommeded to add the oil with the machine programmed at
the top speed.
BELT ALIGNMENT:
Due to use, the belt might move off center. If the belt has
been displaced to the left, start the treadmill and turn the speed up to 3 MPH.
Use the 5 mm wrench to turn the fixed left bolt clockwise or turn the right
bolt counter-clockwise. Do not tighten the belt too tautly to be able to walk.
Repeat the procedure until the belt is properly aligned. If the belt slips, use
a 6 mm wrench and tighten the screws on both sides, turning 1/4 clockwise.
Reapeat this procedure until the belt is firmly tightened.
CLEANING
: Do not use abrasive products. A wet cloth is sufficient.
MADE IN P.R.C.
< 3 hours / week
4 - 7 hours / week
> 8 hours / week
2 months
1 month
15 days
