INSTRUCTION MANUAL FOR PULSE OXIMETER/
MANUAL DE USO PARA PULSIOXÍMETRO
Model/Modelo: PX-01
1 Safety
1.1 Instructions for safe operations
Check the main unit and all accessories periodically to make sure that there is no
visible damage that may affect patient’s safety and monitoring performance about
cables and transducers. It is recommended that the device should be inspected
once a week at least. When there is obvious damage, stop using the monitor.
Necessary maintenance must be performed by qualified service engineers ONLY.
Users are not permitted to maintain it by themselves.
The oximeter cannot be used
together with devices not specified in User’s Manual.
Only the accessory that appointed or recommendatory by manufacture can be used
with this device.
This product is calibrated before leaving factory.
1.2 Warnings
Explosive hazard
—DO NOT use the oximeter in environment with inflammable gas
such as some ignitable anesthetic agents.
DO NOT use the oximeter while the testee measured by MRI and CT.
The person who is allergic to rubber can not use this device.
The disposal of scrap instrument and its accessories and packings(including battery,
plastic bags, foams and paper boxes) should follow the local laws and regulations.
Please check the packing before use to make sure the device and accessories are
totally in accordance with the packing list, or else the device may have the possibility
of working abnormally.
Please don't measure this device with function test paper for the device's related
information.
1.3 Attentions
Keep the oximeter away from dust, vibration, corrosive substances, explosive
materials, high temperature and moisture.
If the oximeter gets wet, please stop operating it.
When it is carried from cold environment to warm or humid environment, please do
not use it immediately.
DO NOT operate keys on front panel with sharp materials.
High temperature or high pressure steam disinfection of the oximeter is not permitted.
Refer to User Manual in the relative chapter for instructions of cleaning and
disinfection.
Do not have the oximeter immerged in liquid. When it needs cleaning, please wipe
its surface with medical alcohol by soft material. Do not spray any liquid on the
device directly.
When cleaning the device with water, the temperature should be lower than 60
℃
.
