ATTENTION ! ! !
• Wheel locks are not intended to brake your wheelchair. It's just there to make
sure your wheelchair does not start to roll in.
• When stopping on uneven ground, always use wheel locks to prevent such
rolling.
• Always use both wheel locks. Otherwise, your wheelchair could be overturned.
• Wheel locks are not designed to be used as brakes for a moving wheelchair.
RELEASE / INSTALLATION BACK WHEELS
1. Do one of the following:
Unscrew the end of the shaft and pull it together with the wheel out of the shaft
assembly plate
.
Pull the four
-
arm release shaft handle and pull the shaft and the wheel out of the
shaft assembly plate.
2. Repeat STEP 1 for the opposite rear wheel.
3. To replace the rear wheel on the shaft support plate, reverse STEPS 1
-2.
ADJUSTABLE HEIGHT
Close the armrest by pushing the release lever to the DOWN (CLOSE) position
when the desired handle height is reached.
IF
U
re
v.1.
1_
07/
2017
Summary of Contents for Gemini 0811300
