16
CR-L
CR-R
CR-R
．
Torque to 34.3 Nm
CR-L
．
Torque to 34.3 Nm
LITHIUM GREASE
LITHIUM GREASE
18. Remove packaging on crank arms.
19. Install the right and left pedals. Please note each pedal is marked with an “R” or “L” on the axle flat area. The right pedal goes on the right side
of the bike or the side where the belt or chain drive is located and the left pedal on the opposite side. Apply a small amount of lithium grease to
both pedal threads before assembly to the crank arm.
•
Note : The right (drive side) pedal turns clockwise and the left (non-drive side) pedal turns counter-clockwise. Tighten using a torque wrench to 304 in-lbf (34.3 Nm).
