2
Step 2: tighten the screws and fasten the iRET module.
Step 3: When connecting the control cable, match the guide slot of
the cable connector with the feather key of the male connector,
then tighten manually.
①the feather key of the male connector
Tighten the joint and hold
②the guide slot of the female connector
thread by hand, then rotate
clockwise until tight.
①
①
②
③
④⑤
①
screw
②
male connector
③
female connector
④
female connector
⑤
handing nut
an
te
nn
a
an
te
nn
a
①
②
