Health Check
•
Press buttons
‘
MEM/SET
’
and
‘
MODE
’
together for 2 seconds to enter the countdown. Use the
‘
MODE
’
button to toggle between 15 minutes, 30 minutes or 45 minutes or OFF.
•
Press the
‘
MEM/SET
’
button when the desired time is on screen to start counting down. When the
countdown is active and running in the background the “
” sign will flash on screen.
•
When the countdown begins, the user can press
‘
MEM/SET
’ and ‘MODE’
button together for 2
seconds to display the remaining time, then press
‘SCAN’
button to return to waiting mode or press
‘MEM/SET’
button to cancel the countdown.
•
When the countdown is zero. Health check
“ ”
symbol will display on LCD and the
unit will ‘BEEP’
to
remind the user. To stop
the notification’s and return to the home menu press a
ny button.
Memory Function
•
This unit can recall up to 9 prior measurements stored in memory.
•
Turn on thermometer, press the
‘
MEM
’
button once, then press it again to show the last
measurement.
•
The symbols
for ‘EAR’ or ‘FOREHEAD’
will appear with each measurement stored in memory to
indicate whether a person’s forehead
or ear temperature was taken.
•
Each press of the same button recalls a previous measurement.
Troubleshooting
Problem
Checklist
Countermeasure
No response/automatic reset
when pulling out plastic insulator
tab.
Batteries are low or dead
Batteries installed in wrong
polarity?
Poor battery contact?
Change to new batteries
Remove batteries and reinsert
batteries correctly
Measured temperature is lower
than 89.6°F/32.0°F or higher than
109°F/42.9°C
Follow steps in user manual for
correct measurements.
Check the device is in the correct
operating mode.
These Error messages indicate a
problem with the hardware.
Contact Mobi Technologies, Inc.
via contactin information at the
end of this manual.
