Mobeye CMVXI-R, User Manual

Page: 8 / 28

7
3.2 INSERT THE SIM CARD
Insert the SIM card into the module. Push the
black cover slightly outward to open the holder
and close it afterwards.
When using the Mobeye SIM card:
The supplied SIM card has a PIN code
protection, which means that it can only be
used in the Mobeye device.
Note: do not place it in another device.
When using your own SIM card:
Before installing the SIM card should have PIN code "0000", or PIN code removed.
(A PIN code can be changed or removed by putting the SIM card in to any mobile phone and
entering the 'security' menu.)
NB: Make sure the SIM card is inserted before the batteries. If you replace a SIM
card, first remove the batteries. The settings are stored in the device memory. The
SIM card shall have the “normal” size and be suitable for 2G. It is advised to use an
M2M SIM card.
3.3 INSERT THE BATTERIES
Insert the two batteries (CR123) in the module. Use the +/- indication for the correct
placement. If you replace the batteries the settings will not be deleted, since they are
stored in the device memory.
When using the extra battery pack: connect the white connector to the connector
that is plugged into the +/-. Place the battery pack below the circuit board in the
housing. It will be clamped in the enclosure as soon as the housing is closed.
The housing can be closed already after this step or after programming.