Brief
The Alternating Pressure Mattress consists of
two parts: the mattress and the pump. The pump
utilizes a small compressor to remain quiet and
energy efficient. The control panel is simple and very
user friendly. The mattress relieves pressure by
sequentially deflating and inflating alternate air cells
on approximately 12 minutes timed intervals. It is
widely recognized that constant pressure to a bony
prominence is the leading cause of skin breakdown.
The continuous movement supplied by the unit
lessens the areas of constant pressure and
enhances circulation.
Caution
1.
Do not smoke on or near the pump.
2.
Keep the pump away from heated surfaces.
3.
Explosion risk if used in the presence of
flammable
anesthetics.
4.
Replace fuse as marked: T1A 250V.
5.
Power Input: AC
11
0V 60Hz, 0.1A
10
lbs (2.3kg)
3 lbs (1.4 kg)
30
9
lbs (1
40
kg)
AC
11
0V 60Hz, 0.1A MAX
T1A 250V
10°C to 40°C
(50°F to 104°F)
10% to 75%
-18°C to +43°C
(0°F to 110°F)
10% to 95%
Alternating
Pressure
Mattress User Manual
WEIGHT OF PRODUCT
MATTRESS WEIGHT
:
PUMP WEIGHT:
WEIGHT
CAPACITY
MAXIMUM PATIENT WEIGHT
:
ELECTRICAL
OPERATING POWER:
FUSES:
ENVIRONMENTAL CONDITIONS
OPERATING CONDITIONS
Ambient Temperature:
Relative Humidity:
STORAGE AND SHIPPING CONDITIONS
Ambient Temperature:
Relative Humidity:
C
i
rcu
i
t Diagram
Features
1.
Place the mattress on the bed frame with the hose
end at the foot section of the bed frame.
2.
Using the integrated hooks, securely hang the
pump on the bed end at the foot end or place on a
smooth flat surface.
3.
Connect the air hoses from the mattress to the
pump.
4.
Plug the pump into a wall outlet. Be sure the power
cord is safely away from possible hazards.
5.
Turn on the power switch on the control panel of
the
pump. The pump will begin to inflate the mattress.
6.
After inflation, adjust the mattress using the dial on
the pump.
Operation
