EN
Shower Radio with Suction cup
Instructions:
1. Open the bottom round case of radio, insert 2 pieces of AAA
battery, and then close it.
2. Turn on the radio by switching the power/volume control tune
(1).
3.
To choose a desired channel, press the “RESET” button (2) to
set the frequency at the lowest setting.
4.
Press the “SCAN” button (3) once to automatically search for a
channel.
5.
To select a desired radio channel, press the “SCAN” button (3)
momentarily and pause listen to the channel. If you have not
reached the desired channel, repeat these actions. Radio will
be automatically turned into the next radio channel with a
strong signal. After you have pressed the “SCAN” button for a
few times and you do not hear any sound from the radio, the
radio has reached the highest frequency. Press th
e ”RESET”
button to start tuning.
6. Big suction cup(4) for mounting on the window/glass, and air
release by pushing the leg on suction.
Tips to mount suction cup on glass:
•
Take off the suction from unit,by hold the radio and turn the
suction cup in counter clockwise direction,see figure 2
•
Clean the surface of suction cup and glass to ensure they are
free of dust and stain
•
Place suction cup onto glass and push the air out as much as
possible,see figure 3
•
Align the center of radio with the center of suction cup, and
ensure the connection part is corresponding to each other,see
figure 4
•
Turn the radio in clockwise direction to lock onto the suction
cup,see figure 6
•
To ensure the radio placement is well done,pull and push to
double confirm before leave.see Figure 6
Summary of Contents for MO7496
Page 2: ...MO7496...