Thermoelectric Cooler
- English manual
8
EN
Ventilation
When putting a TE cooler, ventilation should be considered seriously,
please refer to the following:
1. there should be left at least 200 cm3for ventilation
2. the distance between the wall and cooler side should be at least
20mm
3. the bottom should be left at least 50mm for air flowing
4. air passing through must not be preheated
5. the entire cooling system should be considered in the ventilation
TROUBLESHOOTING
Failure: No cooling
Possible reason: No power
Action: Check the electricity supply, or change a new plug
Failure: Poor cooling performance
Possible reason: High ambient temperature
Action: The room temperature is hotter than normal
Failure: Poor cooling performance
Possible reason: Poor instruction
Action: The door is opened too often
Failure: Poor cooling performance
Possible reason: Poor ventilation
Action: Install cooler according to our ventilation instruction
Failure: Noisy
Possible reason: Dust
Action: Clean the dust from the fan
Failure: Frost or ice inside
Possible reason: No defrost
Action: Stop working for at least one hour, then restart it
Failure: Frost or ice inside
Possible reason: Low ambient temperature
Action: Adjust the air-conditioner to be around 25degree
