Sensor Bin
- English manual
4
EN
OPERATING MODE
Auto induction mode:
The lid will open automatically when you come within 10~25 cm area
in front of the touch screen,If under 10cm,it will not sense.
Delay closing mode: When the auto sensor is on, in induction area,the
lid will stay open. After the person or object leaves, the lid will
automatically close after a 5 seconds countdown.
Manual open mode: Lightly touch the OPEN button,the lid opens
at once and stays open. To close manually, lightly touch the CLOSE
button,the sensor bin will revert to the auto induction mode.If not touch
the CLOSE button, the lid will close automatically after 120s in manual
open mode.
MALFUNCTIONS AND SOLUTIONS
Malfunction: The lid fails to open
Solutions:
- Check if the batteries are installed properly or if the batteries are in
good contact with springs.
- Check if the switch is turned on.
- Leave the inductive area for 10 seconds and then try again.
Malfunction: The lid fails to close
Solutions:
- Check if there is interferent in the inductive area.
- The circuit may be damp.Turn off the switch and put the lid in a
ventilated place until it is dry then try again.
Malfunction: The lid opens very slowly
Solutions:
- The batteries are running low,pls replace with new ones.
- Remarks:If the above solutions don’ t work,please consult local sales
agency.
Auto induction
5 Seconds to close
Strobe to change batteries
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE