Retro Fridge
- English manual
17
EN
Problem: Moisture forms on the inside or outside walls of the fridge.
Solution:
- Hot and humid weather increases the internal rate of frost build—up.
This is normal.
- Open the door less often and make sure it is always properly closed.
Problem:The outer surfaces of the appliance are wet.
Solution:
- Condensation will from on the outside of the cooler if it operates in
moist areas, simply wipe it dry.
Problem: Smell/odour.
Solution:
- Check all the food and drink that is in the fridge is in date and
correctly packaged. If it isn’t then it should be removed immediately or
repackaged. Check for spillages on each shelf, rack and drawer. You
may need to remove the drawers to check that no spillages have settled
underneath them. Spillages that have not been cleaned and have been
left can cause smells and unwanted odours.
Problem: The doors do not close properly.
Solution:
- Ensure there are no obstructions preventing door closure.
- Check the door compartments and shelves are correctly in place.
- Check the door seal is not warped or torn.
- Check the appliance is level.
Problem: Unusual noises.
Solution:
- Check that the appliance is on a flat, level surface and is stable.
- Check the spacing’s around the appliance and ensure it is not
touching other items.
- Bubbling and gurgling sound:• This noise is emitted as the
coolant fluid flows through the pipes within the system. This is normal.
-Water flowing sound: • This is the normal sound of water
flowing into the drain trough during the defrosting process.
- If the appliance is operating noisily (compressor noise): This is normal.
This noise indicates that the compressor is operating normally. As the
compressor is being energized, it might run a bit more noisily for a
short period of time.
- Contraction and expansion of the inside walls may cause popping
and cracking noises.
