2
Chapter 2 External Component Description
2.1 Front Panel
The front panel of the Switch consists of series of LED indicators, 8 10/100Mbps RJ-45
ports, 1 10/100/1000Mbps RJ45 port and 1 100/1000Mbps SFP port shown as below:
Figure 1 - Front Panel
10/100Mbps RJ-45 ports (1~8):
Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a
corresponding Link/Act and PoE Status LED.
10/100/1000Mbps RJ45 port (9T):
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps.
Each has a corresponding Link/Act LED.
100/1000Mbps SFP port (9S):
Designed to install the SFP module. The Switch features one SFP transceiver slots that
are shared with one associated RJ45 ports. A SFP port and an associated RJ45 port are
referred to as “Combo” port, which means they cannot be used simultaneously, and only
SFP port work or only RJ45 port work at the same time.
LED indicators:
The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential
problem with the Switch, connection or attached devices.
Figure 2 - LED Indicators
