EN
BEFORE STARTING UP THE DEVICE PLEASE READ THE USER MANUAL!
IMPORTANT NOTE: THE DEVICE USES ANDROID 6.0 OPERATING SYSTEM ITS FUNCTIONS AND
DESIGN MAKES IT POSSIBLE TO HAVE A FULL MULTIMEDIA SETUP IN YOUR VEHICLE. THE USER
MANUAL DOES NOT GO INTO DETAIL OF ITS DESIGN, DETAILED SETTINGS, PLEASE RESEARCH
THEM AND STUDY ITS FUNCTIONS.
INSTALLATION:
The device can only be installed into vehicles with 12 volt DC, negative grounded electric network.
Before installing make sure that your electric system is suitable for the device!
Take of the battery’s negative clamp before connecting the device to avoid any damages caused by short
circuits while wiring.
Make sure that the speakers negative wiring is connected to the device’s negative plugs! Never connect
the left and rights side speakers in one point or to the car’s body! Don’t cover the heatsinks, it can lead to
the overheating and damage of the device!
After installing and adding voltage to the device press the RES button found behind the front panel with
a small and thin object! With this you set the device to default options. The first startup after adding
voltage will take 1-2 minutes to boot the operating system please wait while its loading.
WARNING!
ELECTRICAL HAZARD!
DO NOT OPEN!
WARNING: TO DECREASE THE CHANCE
OF ELECTRIC SHOCK OR FIRE, KEEP AWAY
FROM RAIN AND HUMID ENVORIMENTS!
WARNING: IN ORDER TO LESSEN THE CHANCE OF ELECTRIC SHOCKS DON’T REMOVE THE
CASING, THE DEVICE DOES NOT CONTAIN PARTS THAT CAN BE REPAIRED BY THE AVRAGE USER.
MAINTENANCE MUST BE DONE BY PROFESSIONALS!
The lightning symbol in the equilateral triangle warns the user that the device
contains un-insulated dangerous voltage which is strong enough to cause electric
shocks to the user.
The exclamation mark in the equilateral triangle warns the user that the documents
that came with the device contain important maintenance notes and instructions.
1. Read the user manual before installing and using the device!
2. Don’t touch the power supply with a wet hand!
3. Turn off the device if you are not using it! (Unplug it from the power supply if not used for a long time)
4. Don’t open the devices top panel and don’t touch its parts, leave it to professionals!
5. Don’t expose the device to direct sunlight or heating effects, this can lead to the damaging of the device!
6. Don’t use the device in wet or humid environments, this can lead to the damaging of the device.
7. 7. Install the device into a well ventilated area, to avoid incorrect operation take care to not cover the vents.
8. The display can only be cleaned with a soft and dry napkin, don’t use alcohol or cleaning sprays.
9. Keep away from liquids, may cause harm to the device.
