MMF VM40C, Instruction Manual

Page: 7 / 22

2.3. Entering Measuring Channels
In the next step information about the measuring channels of the device needs to be
entered. The following channels are sent by the VM40C:
- Amplitude values for X, Y and Z in mm/s or m/s².
- Main frequency in Hz
- Battery charge level in percent
- Current status (0 = heartbeat; 1 = warning; 2 = alarm)
Click "Add Module." Add six modules and name them as shown in Figure 4. Further
down you can enter the longitude and latitude of the measuring point. This will then
be displayed on an interactive map. With "Save sensor" you save your entries.
By clicking on the device channel (Figure 2) you can check the settings of device
and measuring channels.
Here you will also find the key "
API Key In ", which must be entered in the VM40C
(cf. page 8) to establish the connection to AskSensors.
3
Figure 4: Setting up measuring channels