®
Q:JQ:J©@OO
Standard Guest Paging System User Manual
7.DeleGuest ID
Delete guest pager No. message
8.DeleStaff ID
Delete staff pager No. message
9.Dele Okey ID
Delete single key paging message
1 0.Dele Message
Delete common message
(currently can not be used)
11.TestMode
Test Mode
12.lnitialize
Initialize all the data
13.Send Mode
Setup transmitting mode
14.Set Frequency
Setup coaster frequency
15.OutPut Lead
Always output lead code
2.6.1 Guest Group Paging ID
Input ID through keypad, which has to be the second ID
of the coaster pager, as picture 2.15
Picture 2.15 Edit Guest Group Paging ID
2.6.2 Guest Paging ID
The message before - is the coaster No., after - is the ID,
press ENT to save the data. If there are repeated No. input, it will
replace the previous No. Press upper/lower key to check and
modify the message, this ID address is the third ID of the
coaster, as picture 2.16.
14------------------------
®
Q:JQ:J©@OO
Standard Guest Paging System User Manual
Picture 2.16 Edit Guest Paging ID
2.6.3 Single Key Paging
Use upper/lower key to edit the single key paging, 0 is the
single key number, 001 is the corresponding waiter/staff
number, the content after- is the paging message. Press ENT
to save the message. This function is only for staff paging
use, the ID has to be the ID of staff pager. E.g.
001.002-0989897, press F3 to enter single key paging
interface, press keypad 1, then it will page staff pager No.
002 and the paging message is 0989897. Press one time it
will page one time. For this function, no need to press SEND,
just the single key will be ok.
Picture 2.17 Edit Single Key Paging Message
2.6.4 Delete Message
Enter delete message interface, press upper/lower key to
the message to be deleted, press '*' to delete that
message.
------------------------15
