Skylle 1550 User Manual 20181107V2
|30
17
/
31
How to turn transmitter power ON/OFF
When turning on the power, the T14SG transmitter will begin emitting RF automatically after it confirms the
surrounding RF conditions.
The T14SG transmitter also offers the ability to auto shut-down.
When turning on the power of the transmitter
1.
Turn on the power switch of the transmitter.
*The message ‘CHECK RF CONDITION’ is displayed for a moment. At the same time the left LED monitor blinks.
2.
Then, you will see the home screen and the transmitter begins to emit radio waves.
*The left and right LED monitors will change to solid red.
How to stop the transmitter:
Turn off the power switch of the transmitter.
*The transmitter shuts down at once.
Low battery alarm and auto shut-down:
When the battery voltage reaches 5.2V, an audible alarm will sound. Land your aircraft immediately.
When the battery voltage reaches 3.9V, the transmitter will be turned off automatically.
*If you do not operate the transmitter (or move a stick, knob, switch or digital trim) for 30 minutes, the message
“PLEASE TURN OFF POWER SWITCH” is displayed and an audible alarm will sound.
Warning display at power ON (UAS):
When the throttle stick during power ON is at the high side (or over 1/3 stick) a warning will be displayed.
*below 1/3 stick, the warning display goes off.
