ASSEMBLY INSTRUCTIONS (CONT.)
7
7. Before assembling PLAYER RODS, refer to the diagrams below for correct rod ori-
entation and player placement.
Note: You may choose either color for home or away
teams.
8. Begin PLAYER ROD assembly by partially inserting PLAYER ROD into appropriate
hole in the SIDE PANEL.
Note: the HAND GRIP will be attached to the marked end
of the PLAYER ROD - this end must be inserted into the SIDE PANEL first.
Slide one
RUBBER BUMPER #7 and PLASTIC ROD WASHER #8 onto the partially inserted
PLAYER ROD. Slide the appropriate quantity and color player onto the PLAYER ROD.
Finish PLAYER ROD assembly with PLASTIC ROD WASHER #8 and RUBBER
BUMPER #7. Insert PLAYER ROD into opposite SIDE PANEL. Fasten PLAYERS to
PLAYER RODS with -/8" BOLT #7 and LOCKNUT #8.
9. Repeat assembly with remaining PLAYER RODS.
Note: Each team should face op-
posite goal.
0. Attach HAND GRIP #6 to appropriate end of PLAYER ROD. Attach ROD END
CAP #5 to the opposite end.
EXAMPLE OF 3 PLAYER
ROD ASSEMBLY:
TOP VIEW OF TABLE FOR
PLAYER PLACEMENT:
