Mliza DD515, Owner'S Manual

Page: 56 / 80

Making the Settings for Pads
About Settings of Pads
Pad Settings
Sensitivity (1-16)
Threshold(0-16)
Crosstalk(1-16)
Curve(1-6)
Rim Sensitivity (1-16)
Splash Sensitivity (1-9)
Pad
Special
16
If the digital drum is not y et in U TILITY menu, press the
[U TILITY ] b utton to enter it.
The U TILITY indicator will light up. Y ou can use the [ ] or [ ]
b uttons to adjust parameters (as shown to the right ) for each
pad as well as the rim sensitivity of the pad and the splash
sensitivity of the Hi-Hat control pedal.
The current pad to b e edited can b e selected either b y pressing
its Pad Select b utton, or b y striking the pad itself. The PAD
indicator will light up to show which pad is currently selected. If
the rim of a pad is selected, b oth the PAD indicator and the
RIM indicator will turn on.
Sensitivity: Adjust the sensitivity of the pad to regulate the pad
response. Higher settings result in higher sensitivity , so that the
pad will produce a loud volume even when struck softly . Y ou
can also adjust the sensitivity of the splash in SPLASH
SEN SITIV ITY .
Threshold: This setting allows a trigger signal to b e received
only when the pad is struck harder than a specified force. This
can b e used to prevent a pad from sounding in response to
ex traneous vib rations from another pad.
Crosstalk: W hen two pads are mounted on the same stand, the
vib ration produced b y hitting one pad may trigger the sound
from another pad unintentionally (This is called crosstalk). Y ou
can avoid this prob lem b y adjusting Crosstalk Cancel on the
pad that is sounding inadvertently . If the value is set too high,
then when two pads are play ed simultaneously , the one that is
struck less forcefully will not sound. So b e careful and set this
parameter to the minimum value req uired to prevent such
crosstalk. W ith a setting of 0 , crosstalk prevention does not
function.
Curve: This setting allows y ou to control the relation b etween
the velocity (striking force) and changes in volume (the dy namic
curve). Adjust this curve until the response feels as natural as
possib le.
HI-HAT
HI-HAT
CON TROL
SN ARE
CRASH 1
TOM 1 TOM 2
TOM 3
RIM
K ICK
TOM 4
CRASH 2
RIDE
LIGHT
ON /OFF
（ ）