MLB-Z1001 Quick Installation Guide
HW installation
Step 1: Please connect serial port to device as follow pinout
Pin No.
Signal Name
Function
1
DCD
Input
2
RXD
Input
3
TXD
Output
4
DTR
Output
5
GND
GND
6
DSR
Input
7
RTS
Output
8
CTS
Input
9
Not used
Step 2: Please connect to 5~32 VDC power supplier, after boot up, the LED of power will
light up.
Step 3: After plugging in power adapter. The modem is usually fully operational within 4
seconds, after powering it up. Depending on the signal strength of the network in the area,
logging into a network may take longer and is outside the control of the modem.
The device is ready after LED of signal is lighted. Then user can operate it.
