Quick Installation Guide
1
1
3. Login with default account and password.
Username: admin
Password: (none)
4. Change the IP with commands listed below:
CLI Command:
LED STATUS INDICATIONS
LED Name Indicator /color Condition
P1/P2
On Green
P1/P2 power line has power
Off
P1/P2 power line disconnect or does not have power supplied
Alarm
On Red
Ethernet link fails, alarm or power failure alarm occurs
Off
No Ethernet link fails and no power failure alarm
Copper port
Link/Act
On Green
Ethernet link up but no traffic is detected
Flashing Green Ethernet link up and there is traffic detected
Off
Ethernet link down
Copper port
Speed
On Yellow
A 1000Mbps connection is detected
Off
No link, a 10Mbps or 100 Mbps connection is detected
SFP port
Link/Act
On Green
Ethernet link up
Off
Ethernet link down
SFP port
Speed
On Yellow
SFP port speed 1000Mbps connection is detected.
Off
No link or a SFP port speed 100Mbps connection is detected
POE LED
On Yellow
POE is detected
Off
No link
enable
configure terminal
interface vlan 1
ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
exit
